Performance PLA - Carbon Fiber
Matter3D Performance PLA - Carbon Fiber is made right here in Victoria, BC using premium NatureWorks 3D850 PLA resin and High-Modulus Carbon Fiber. Carbon Fiber PLA filament is ideal for anyone that desires an end-use component with very high modulus (stiffness), excellent surface quality (matte finish that masks layer lines), dimensional stability (very accurate retraction), light weight, and ease of printing. This material is designed to be printed at high speed with almost no loss in dimensional tolerance.
This is our favourite material to print with and our best formulation thus far.
Benefits of Carbon Fiber PLA:
- Extremely stiff material
- 10% (by weight) Carbon Fiber content
- Strong and light weight, ideal for structural designs
- High heat resistance (> 90C)
- Matte finish
- Superior chemical resistance when compared to ABS
- Crystalline structure that prevents warping
- Low moisture absorption, 3x lower than ABS
- No odor while printing
- Wide processing range from 215-250°C
Any parts made with Matter3D’s Performance PLA can be heat treated (annealed) to improve the material's physical properties. To anneal a printed part, heat the part at 80 – 130 °C for up to 30 minutes by either submerging in hot water or by baking in an oven.
This material is particularly abrasive among 3D printing filaments. Users may find standard brass nozzles are chewed through very quickly compared to standard wear and tear. When worn through, the nozzle diameter will widen inconsistently and the printer will experience extrusion issues.
Matter3D’s Carbon Fiber PLA is precision extruded and immediately vacuum-sealed before shipping with desiccant for protection against moisture. This product is available in 1 kg spools (2.2 lbs) and can also be ordered on a 1kg Master Spool. Matter3D always recommends drying your filaments before use.
This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm or 2.85 mm filament.
Proudly compounded and manufactured in Canada!
Product Name: Carbon Fiber PLA
Product Code: FIL-1021-00-10-CPL
1.75 +/- 0.02mm
2.85 +/- 0.02mm
Weight: 1 kg
Length: 335 m
Density: 1.20 g/cc
Nozzle Size: ≥ 0.4 mm; We recommend a hardened steel nozzle
Nozzle Temp: 225 – 260 °C
Bed Temp: Not Required
Bed Prep: Hairspray, Glue Stick, Polyimide (Kapton) surface
Layer Height: ≥ 0.2 mm
Print Speed: ≤ 100 mm/sec
Fan speed: 0 – 30%